New Firmware

[gitup]

New Firmware is available.
https://drive.google.com/open?id=1gbyyn_x_-KUXL_lQo6zUu0MHEd8BWXiF

1. Improved: Missing PWM issue while doing remote trigger
2. Improved: Support turn the gyro on/off using the quick menu
3. Added: More Wi-Fi control options(New APP is under development)
4. Fixed: Video recording in 2160P 24fps high bitrate mode

 

[kubazil]

Is this the official release of the firmware or just a test version only?
It's a newer version than Git3_V1.1_20171129 which is here: http://support.gitup.com/support/solutions/articles/6000186932-g3-duo-action-camera-firmware ?

 

[Niksk]

One G3 Software glitch to be reported.

Updated the cam to V1.1_1130

In the cam's *photo/image mode*, the cam display (cam OS) shows image setting *8MP & 12MP*

When linked the cam to *phone app* via WiFi, & toggling the resolution from phone it shows *16MP, 12MP, 8MP, 5MP...etc*

So I can't set the cam to 16MP via its screen, but only via connecting via WiFi to phone app & access to setting remotely.

Adding few screenshots & cam screen images for better info.

View attachment 239 View attachment 240 View attachment 241 View attachment 242

 

[Luch]

New Firmware is available.
https://drive.google.com/open?id=1gbyyn_x_-KUXL_lQo6zUu0MHEd8BWXiF

1. Improved: Missing PWM issue while doing remote trigger
2. Improved: Support turn the gyro on/off using the quick menu
3. Added: More Wi-Fi control options(New APP is under development)
4. Fixed: Video recording in 2160P 24fps high bitrate mode

Hello,

when I export my GPS file. I see only one per second and not 10. Have you found how to change the firmware?

I use the original Gps in the photo, I just configure the update in 5hz because not possible in 10hz.

The Nmea messages are original to the gps.

I connected to this gps in ttl.

I also tried with a Qstarz 10hz gps by connecting the tx output.When I extract gps data with dashviewer, I only see one row per second.

Do you have a csv file checked out from the gitup for me to see?

Thank you.