I have a problem with my new Git1 which arrived today from Gearbest.
I hold it until it powers on it beeps 3 times and all I see is a white screen. and 1 Red LED on the front of the camera. The odd occasion it boots into the menu but very rare.
I have tried 1.30/1.20/1.10/1.08 firmware all the same result after the firmware has gone through its process Green Blinking led on the front it goes a solid Red and the top Led Red and the back blinking Red with a White blank screen.
I then turn the camera off remove the Micro SD card and hold the power button for 4 seconds and same scenario white screen and solid RED LED on front, will not go into the menu or display what the camera is seeing.
If I use the final Cam app and enable Wi-Fi on the camera I see the image on my phone but the screen on the Git1 is White.
Motion Detect and G-Sensor are also Off all other default values.
I hold it until it powers on it beeps 3 times and all I see is a white screen. and 1 Red LED on the front of the camera. The odd occasion it boots into the menu but very rare.
I have tried 1.30/1.20/1.10/1.08 firmware all the same result after the firmware has gone through its process Green Blinking led on the front it goes a solid Red and the top Led Red and the back blinking Red with a White blank screen.
I then turn the camera off remove the Micro SD card and hold the power button for 4 seconds and same scenario white screen and solid RED LED on front, will not go into the menu or display what the camera is seeing.
If I use the final Cam app and enable Wi-Fi on the camera I see the image on my phone but the screen on the Git1 is White.
Motion Detect and G-Sensor are also Off all other default values.
Last edited by a moderator: