A Complete Guide On How To Empty A Dyson Vacuum

Learning how to correctly empty a Dyson vacuum is a crucial attribute to have if you have one now. By emptying it appropriately, you may considerably prolong the durability of your dyson and maintain it in perfect condition at all times. The King Live acknowledges that Dyson is among the best vacuums for pet hair and a new Dyson is an expensive purchase.

Learning how to empty a Dyson vacuum: the quickest & easiest ways can also assist you in avoiding a sloppy mess in the kitchen. Bagless vacs are infamous for being difficult to dump. If you're not cautious, you might end up with a bunch of dirt, filth, and other terrible things in your house.

How To Empty A Dyson Vacuum

Dyson offers hundreds of versions in its inventory, each with its own distinct design. As predicted, the location of the controls and the dirt container varies with each design concept.

The King Live will make every effort to include as many products as possible. But, if you do not even discover yours, you may still follow along. The design may alter, but the approach can remain consistent!

What You'll Need to Complete This Tutorial

You do not need much to follow along with this tutorial. Here is the complete list.

  • A clean towel
  • Dyson's combo tool (optional)
  • A tiny brush or similar tool
Dyson Ball vacuum

The dust cup of the Dyson Ball vacuum series is removable. By pushing the button at the top of the container, you may separate it from the vacuum body. When squeezed, the full cup must come out. Take hold of the cup's handle and drag over to a garbage container. Place the base of the container on top of the can. To minimize spills or kicked-up dust, place the base of the container as far into the garbage bin as possible. When you push the release button in the upper of the grip again, the base of the container will open, spilling its contents. When most of the dust and dirt in the container has been removed, gently shake or bang the cup to remove any residual dirt. Shut the container's base entrance. When the entrance is correctly shut, there must be an audible snap. Bring the container to the cleaner and set it in its proper position. When you shake or tug on it again, there ought to be a click and the container should not slide or come loose.

Dyson V6 to V8

From the Dyson V6 to the V8, they will include an L-shaped dirt container. Most users are more accustomed with this layout, but for those who are novice to Dyson, here's what to do if the container fills up.

First, ensure the machine is totally turned off. The power button must be turned off, and the wire must be unplugged from the power socket.

A red button is located behind the dirt container, near the vacuum's grip. It will open the container base when pushed. Ensure you're placing the vacuum over a garbage bin before you begin.

If you wish to remove the dirt container completely for washing, click the same button again once the door has been opened, and the container will come off.

You are free to rinse or scrub the container clean as you see fit. Return the machine to its original location and shut the base entrance.

Dyson V10 to V15

Currently, only 3 models use the innovative, in-line dirt container prototype: V10, V11, and V15. Since the dirt container is linked to the wand and the engine, unloading it is a little more difficult.

Remove the front suction wand after turning off the vac. Take the wand away from the vac by pushing the Wand Release button.

With the wand removed, you can now see the cup's release door.

Move the dirt container towards the garbage container while holding the handle. Instead, you may turn the machine inverted and direct the front piece of the suction at the garbage can. This reduces the quantity of dust stirred up.

A red lock is located beneath the dirt container. When you push the latch, the dirt container door will open, releasing the contents inside. When compared to the previous model, this is substantially more sanitary since you will not come into close touch with the filth!

If you wish to cleanse the container, there is a tiny button on the front with a little white arrow. Hitting the button, you can slide the cup off for cleaning.

To rebuild, follow the steps outlined above in reverse order.

How to Clean Dyson Vacuum’s Cyclone Shroud

The cyclone shroud is the odd-looking element on your vac that resembles an artichoke bulb. It allows the machine to create the intense suction required to lift dust and dirt.

Its base will be within the dirt container, making it one of the dirtiest areas. This element can become dirty with time and will need to be cleaned on a regular basis.

You need a brush to clean it thoroughly. Luckily, most Dyson include a combo tool that includes a brush.

Wipe off any dirt, dust, or particles that have accumulated on the outside of this element with this tool. The cyclone's interior components cannot be cleaned.

Never submerge the cyclo in liquid or put soap on it. Treat it as though it were an electronic component.

How to Clean Dyson Vacuum’s Dust Cup

Your dust cup will become filthy after a time. There might also be dust, pollen, or hair trapped inside the interior components. So, occasionally, take it out and clean it to guarantee that it's spotless.

First, as previously directed, take out the dirt container. Then, rinse it with cold water. Clean up the little details within the container using a brush. Eliminate any blocked debris from the container interior. After rinsing the cup, pat it gently with a dry cloth. Allow the container to dry on the countertop or somewhere with enough cool breeze in a few hours. While the container is still moist, do not put it in the vac. You risk damaging your Dyson. Furthermore, do not use detergent, dishwashing liquid, or any other type of chemical to clean the cup. Simply use fresh water.


This is all you ought to know about How to empty a dyson vacuum: The quickest & easiest ways! As you can see, it's not too tough. Take great care of yours, and The King Live is confident it will take care of you for many years to come!
May 15, 1986 (Age: 38)