I try yo update the firmware of my GitupF1 to the latest version from the stock version. The camera's red led starts blinking and that was the last thay for my camera. Any idea
http://support.gitup.com/support/solutions/articles/6000178964-gitup-git1-firmware
no reponse when i connect to the pc
the camera doesn't turn on..
the battery is fully charge
the previus versions of the firmware are not available from the web
i use a scandisk ultra g4 gb memory card fat32 formated and follow this intructions
Upgrade Instructions :
http://support.gitup.com/support/solutions/articles/6000178964-gitup-git1-firmware
no reponse when i connect to the pc
the camera doesn't turn on..
the battery is fully charge
the previus versions of the firmware are not available from the web
i use a scandisk ultra g4 gb memory card fat32 formated and follow this intructions
Upgrade Instructions :
- Use max. 128GB card formatted by camera or on computer as FAT32
- Insert card in camera and connect it to computer using USB cable
- Copy just the FWF1.bin on the root of the card
- After FWF1.bin is copied to the card disconnect the camera from computer
- Restart the camera by pressing the power button. Camera will update automatically and blue LED will flash during this procedure. After upgrade the firmware .bin file will be deleted automatically from the card.
