A129 pro duo with cellink neo6 no parking mode

[rebelhearts]

I have just wired everything together.
The cellink neo6 with the sigarette lighter plug to the car, so its charging with 5 amps.
Then hardwire kit form cellink to the a129 pro.
Everything works, but not parking mode..
when i turn off my car the a129 pro just dies instant.
when i look in the cellink app i see there is no voltage going from cellink to the a129 pro

what did i do wrong or is there something in my setup not right?

first image is when the car is shut off, you see there is voltage but amp is 0
Second screen is when its charging so ignition is on
third screen is how i have set my a129 pro in the app.

firmware: A129Pro.v2.120200803

 

[Capture Your Action]

Cellink hardwire kit to the A129? Do you mean the Viofo 3-wire kit to the A129? Are you using the spliced cable meant to work with the A129?

 

[rebelhearts]

i have this cable to the a129 pro, so from the cellink then this cable then a129 pro

Viofo HK3 Continue voeding Mini USB 3-draads

Viofo Continue voeding met Mini USB aansluiting om Viofo dashcams permanent te voorzien van stroom. Doordat de kabel direct op de stroom van de accu wordt aange

www.allcam.nl

 

[Capture Your Action]

Are you sure you have the cables connected correctly. The Viofo 3-wire kit has the red wire as the battery wire and the yellow wire as the accessory wire, while it appears that the NEO6 is the opposite.

 

[rebelhearts]

hmm you might be right, i have to look that up tomorrow, i have indeed red to red and yellow to yellow and black to blak, but if viofo has it opposite ( or cellink neo ) then indeed it doesnt communicate properly.
strange in that case that it still powers on then.

 

[rebelhearts]

well redid the cables like you suggested and now it works.
only thing is that there are no parking files stored on the SD card, i have it attached to the gps mount, must the power be connected for that on the unit itself instead of the gps mount?

 

[rebelhearts]

ah i see the files are there but not in the app under parking files.