AlphaTango11
New Member
- Joined
- Sep 10, 2020
- Messages
- 3
- Points
- 1
Hi, I recently bought the A129 Pro off of Amazon. My camera is constantly powered through the camera USB port (not the GPS module) and set to enter parking mode (Automatic Event Detection) after some time (not sure, I have the timer from the newest firmware set to 90 seconds but it takes a loop or two of recording before going into parking mode. Could be from motion detection, not sure). This works fine.
However, I would like for the camera to automatically EXIT parking mode when I start driving. I thought I read somewhere that it should be able to automatically switch over to that when your GPS is above 8KM/H or something similar? Is there a way for the camera to automatically EXIT parking mode without the official HK3 kit? I have a Tesla where the 12V battery is constantly charged by the main battery pack and the port I am using receives constant power, I don't really want to have to find a switched fuse. The camera receives constant power regardless, I just want it to switch out of parking mode into driving mode automatically somehow. I am on the newest firmware (2.1) and I have reset to default settings. Is this possible?
However, I would like for the camera to automatically EXIT parking mode when I start driving. I thought I read somewhere that it should be able to automatically switch over to that when your GPS is above 8KM/H or something similar? Is there a way for the camera to automatically EXIT parking mode without the official HK3 kit? I have a Tesla where the 12V battery is constantly charged by the main battery pack and the port I am using receives constant power, I don't really want to have to find a switched fuse. The camera receives constant power regardless, I just want it to switch out of parking mode into driving mode automatically somehow. I am on the newest firmware (2.1) and I have reset to default settings. Is this possible?