Bluetooth Button Will Not Pair
- Thread starter gapi
- Start date
VIOFO-Swin
New Member
- Joined
- Sep 4, 2018
- Messages
- 57
- Points
- 3
Firstly, please can you make sure the battery not run out.
Then, please default setting for the camera, press and hold the video lock button on remote control for 3 seconds, if paired successfully, the LED indicator of the remote control will turn blue.
Please pay attention that if the camera has been paired with a remote control before, you have to default setting first then it can be paired with another.
Then, please default setting for the camera, press and hold the video lock button on remote control for 3 seconds, if paired successfully, the LED indicator of the remote control will turn blue.
Please pay attention that if the camera has been paired with a remote control before, you have to default setting first then it can be paired with another.
gapi
New Member
- Joined
- Jun 17, 2018
- Messages
- 13
- Points
- 1
Thank You! That was it. You know I have two cams and have been testing them in both vehicles and this was it.
I reset to defaults and it paired.
It also gave me a chance to make sure my settings were where I wanted them because I do lots of changes during testing.
I'm good now.
I reset to defaults and it paired.
It also gave me a chance to make sure my settings were where I wanted them because I do lots of changes during testing.
I'm good now.