Git2 brick dead

Mathko

New Member
Joined
Feb 29, 2016
Messages
4
Points
0
While I was shooting a video, my camera suddenly powered down (without touching power button). So I powered my camera back again and checked battery status - battery was fully charged. I have tried to continue shooting, but camera powered down again. Since then, I am unable to power my camera again. No matter what I do, camera is dead. When I press the power button, nothing happens, no led is blinking, lcd screen is off and no beep sound is coming. I have tried to replace the battery with a fresh one - no change. I have tried to boot without sd card - no change. I have tried connecting usb cable, but nothing happened - battery is not charging.

Any suggestions?

Thx
 

gitup

Product Manager
Staff member
Joined
Dec 8, 2015
Messages
538
Points
93
Location
Shenzhen
Website
www.gitup.com
If you connect the camera with charger, any response? Do you know the firmware version, please try to connect it with computer and upgrade with V1.2 firmware if you haven't installed the V1.3 yet.
 

Mathko

New Member
Joined
Feb 29, 2016
Messages
4
Points
0
I did couple of videos (7-10 videos) with original FW and then I made upgrade to FW 1.3. I was able to take another 3-5 videos with this new FW and then my camera died. When I connect a charger, there is no response - no beep, no led on, nothing, dead. I have also tried to put 1.2 FW on my card (fat32, less than 32gb) but nothing has changed - I can't turn my camera on.
 

gitup

Product Manager
Staff member
Joined
Dec 8, 2015
Messages
538
Points
93
Location
Shenzhen
Website
www.gitup.com
I did couple of videos (7-10 videos) with original FW and then I made upgrade to FW 1.3. I was able to take another 3-5 videos with this new FW and then my camera died. When I connect a charger, there is no response - no beep, no led on, nothing, dead. I have also tried to put 1.2 FW on my card (fat32, less than 32gb) but nothing has changed - I can't turn my camera on.
Can you try to upgrad with this loader first and then upgrade V1.2 FW?
https://dl.dropboxusercontent.com/u/22493212/GIT2LD.bin

Please connect the camera with computer to upgrade.
 

silverwolf

New Member
Joined
Nov 20, 2016
Messages
10
Points
0
I get the same thing. I think mine is brick without any reason.

@gitup, please realize that we cannot upgrade the loader as nothing happen when we powered up the camera.
 
Top