Can't get parking mode to work

[benkar]

He's measuring after the HK3 kit, so 5V would be correct.

Yes, at the output, not at the input. Sorry.

 

[airflame]

This is recording from the camera before HK3 disconnect the power. Checked the power on the red cable that goes to HK3

20200311_074039PF

Watch "20200311_074039PF" on Streamable.

streamable.com

 

[Djbt]

Sounds like it’s working normally now.

I have my car set to 12V, but I also drive quite a bit, so I’m always giving my battery a good long charge. If your not It in a cold climate, you should be OK. If your in a cold climate and don’t drive enough to keep the battery topped off, then the battery may drain quickly.

Thanks for the info on the 12V setting.
The hardwire kit I have came with no information at all regarding the setting.
Now I know

 

[airflame]

Ok i recorded the video with when tested with laboratory power supply same thing. I ordered new HK3 too to be sure. It seems its camera problem.

REC_0003

Watch "REC_0003" on Streamable.

streamable.com