Capture Your Action
Well-Known Member
- Joined
- Feb 24, 2019
- Messages
- 1,451
- Points
- 63
The A129 Pro is much different than the other models, so don’t expect the see the same results. The A129 Pro runs hotter and requires more power. My guess is either the hardwire kit is shutting down the camera due to the voltage cutoff point being reached or the internal thermal shut off point was reached due to the camera running while the car is stationary, baking in the sun. Viofo may release new firmware raising the shutdown temp, though that may end up causing other issues, never know.
So these locked files are in the normal driving folder correct? Not in the RO folder correct? Firmware probably has the auto event detection files going into the DCIM folder, but the g-sensor files will still go into the RO folder. These non g-sensor parking mode files will be locked so they are not overwritten along with the normal driving files. They will have their own looping sequence, so they will eventually get overwritten with newer parking mode files.
So these locked files are in the normal driving folder correct? Not in the RO folder correct? Firmware probably has the auto event detection files going into the DCIM folder, but the g-sensor files will still go into the RO folder. These non g-sensor parking mode files will be locked so they are not overwritten along with the normal driving files. They will have their own looping sequence, so they will eventually get overwritten with newer parking mode files.